Protecting Environment MIM Sintering Furnace Material Quantity 32 / 42 Pcs
About MIM
Metal Injection Molding (MIM) Debinding Sintering Furnace
MIM debinding sintering furnace is mainly used for debinding sintering process of stainless steel, ferrous, titanium, alloy steel and high speed steel metal injection molding parts.
Advantages of MIM Part prototyping
- MIM offers rapid prototyping now, with costs much less than typical proto-metal houses.
- Ability to produce high volumes of complex parts
- Relatively low production cost compared to several other metalforming technologies
- If your part is destined for mass production in MIM, the ability to resolve manufacturability issues during the design/prototype stage using the same process as you will use in production, is a big advantage.
- Produces a clean surface finish
- MIM is a Consistent and reliable process.
Technical parameters:
| Usable space (mm) |
400 × 400 × 1500 / 500 × 500 × 1800 |
| Max. working temperature (°C) |
1550 |
| Cooling time (h) |
≤ 6 /8 |
| Vacuum leakage rate (Pa/h) |
≤ 3 (average rate in cold, empty and dry chamber for 24 hours) |
| Vacuum pump |
Slide-valve pump, roots pump |
| Temp. variation (°C) |
≤ 5 |
| Material quantity (pcs) |
32 / 42 |
| Temp. measurement mode |
WRe5-26 thermocouple |
| Temp. control mode |
2-zone or 3-zone temperature control |
| Heating power (KVA) |
150 / 220 |
| Applicable forming agent |
Wax, tree agent |
Competitive Advantage:
1. Compact structure ,small occupation area, low energy consumption, rapid cooling speed, saving energy and protecting environment.
2. Full range of sizes available, canbe usedin experimental research and development, Small and medium-sized enterprises as well as mass prodution. We can design the procucts according to customer’s special requirement.
3. High automation level: one-button start, Double industrial PC operating system,mutually redundant,safe and reliable.
4. The control system is full-automatic with data record &backup function, the operation system is more humanized, more powerful.
5. The Insulation box is of good insulation effect, free of volatilization athigh temperature, with long life.It adopts “sandwich structure”, will be no deformation afteer many years use.
6. Program has resume-heat-at-breakpoint function, no need to restart the program in case of short time power failure.
7. Slot type loading space,Precision parts are heated evenly during sintering without deformation.
8. Convenient and intelligent: The control interface of sintering furnace can be monitored by mobile phone, control and understand the running state of the equipment anytime and anywhere. Fully automatic one-key operation function, realize the supervision of multiple devices by one person, intelligent production, and docking ERP management system.
9. Complete after-sales service system: Provides 7 x 24 hour telephone hotline.Propose solutions within 2 hours after receiving the customer's fault notice. With 15 experienced professional after-sales service staff, not only responsible for the company's product installation and debugging, but also for the need of users to complete the domestic and foreign manufacturers of sintering furnace after-sales and maintenance work.
10. Convenient service: If the customer has the demand may carry on the sintering product test in the Ruideer company site, and the company production site has the hot state pressure condition.
11. Quick installation: The installation can be completed and put into production within 15 days when water, electricity and gas are in place.
Product Tags:
|
|
Protecting Environment MIM Sintering Furnace Material Quantity 32 / 42 Pcs Images
|
